倍加福光柵 LGS50 Serie現貨 倍加福光電傳感器為工業應用保駕護航。倍加福旗下品牌VISOLUX是光電傳感技術的創新代名詞。從精確檢測到光學定位，從物料分揀到零件計數，從常規應用到客戶訂制，倍加福的產品范圍涵蓋了各個行業。
當廣泛的區域需要被監控時，光柵是理想的應用。光柵更容易去嵌入，安裝和對準。因為更傾向于多個個人光電式傳感器。應用領域從材料控制工廠的控制寬度，高度和托盤輪廓到檢測位置-獨立物體，控制較大的傳送物品的重疊，以及監測電梯門。
產品特點：● Automation light grid
● Optical resolution 50 mm
● Super-fast object detection, even with 3-way beam crossover
● Software-free adjustment of height monitoring
● Object identification using integrated object recognition
● IO-link interface for service and process data
● Optional temperature range to -30 °C
| 產品闡述： |
|---|
| Automation light grid with a beam gap of 50 mm, IO-Link interface, push-pull output, fixed cable with M12 plug |
| 一般規格： |
|---|
| Effective detection range | Standard : 0.3 ... 6 m
Option /35: 0.5 ... 8 m | | Threshold detection range | Standard : 7.5 m
Option /35: 10 m | | Light source | IRED | | Light type | modulated infrared light , 850 nm | | Field height | see Table 1, max. 3000 mm | | Beam spacing | 50 mm | | Number of beams | see Table 1, max. 61 | | Angle of divergence | 10 ° | | 功能安全相關參數： |
|---|
| MTTFd | 56 a | | Mission Time (TM) | 20 a | | Diagnostic Coverage (DC) | 60 % | | 指標/操作方法： |
|---|
| Function indicator | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power
Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4 Hz)
Error message: Yellow LED flashes (8 Hz) in emitter and receiver | | Control elements | Receiver: 2 touch buttons for programming | | 電氣規格： |
|---|
| Operating voltage | 18 ... 30 V DC | | 接口： |
|---|
| Interface type | IO-Link | | Protocol | IO-Link V1.0 | | 輸出： |
|---|
| Switching type | Factory setting: dark on , Switchable to light-on mode | | Signal output | Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver),
Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) | | 遵守標準和指令： |
|---|
| Directive conformity | | | | EMC Directive 2004/108/EC | EN 60947-5-2:2007 | | Standard conformity | | | | Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 | | 機械規格： |
|---|
| Degree of protection | IP67 | | Connection | Emitter: 200 mm connecting cable with 4-pin, M12x1 connector
Receiver: 200 mm connecting cable with 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2
Max. cable length 30 m | | Material | | | | Housing | extruded aluminum section , Silver anodized | | | Optical face | Plastic pane , Polycarbonate |
光柵的應用原理：
1、折射原理
利用光柵視覺軟體把不同的圖案轉化成光柵線數，利用光柵折射的原理，在不同的角度呈現出不同的圖案，不同規格的光柵會有不同的折射效果與折射角度，觀賞距離也會有所不同，所以在設計光柵效果圖檔的時候，必須先了解光柵才能設計出符合光柵特性的設計圖。
2、視覺效果
光柵效果可以分為以下幾種：立體[3D]、兩變[Flip]、變大變小[Zoom]、爆炸[Explosion]、連續動作[Animation]、扭轉[Twist]....等，其實可以更簡化分類為：立體[3D]、變圖[Flip]，在變圖中就涵蓋所有變化的效果，這些效果可以透過許多市面上的動畫軟體、繪圖軟體、網頁多媒體軟體，產生所需要的分解圖檔，經由光柵視覺軟體將分解圖合成為光柵線數即可將平面的效果做成立體[3D]、變圖[Flip]的特殊效果。
|
